- SMI Copper (Sunflex Metal Industries)
- Download Catlogue
Menu
Copper Nickel 70/30 Fasteners can be readily fabricated and cold worked. By doing online searches, it is very easy to obtain the best Copper Nickel 70/30 Bolts price. Related specifications of Cu-Ni 70/30 Marine Fasteners include DEF STAN 02-879 Annex B, EN 12164, ASTM B151, CN107, DGS320, C71500, CuNi30Mn1Fe, C71520, NES780, CW354H, BS2874, 2.0882 and DEF STAN 02-780. The Elongation at Break of Copper Nickel 70/30 Socket Set Screw (rolled-H04 for flat products/hard drawn-H80 for tubing), is 11.00% and its Elongation at Break (annealed), is 40%. The Molecular Formula of ASTM B151 70/30 Cupro Nickel Screws is CuNi. 70/30 Cu-Ni Washers has a Thermal Conductivity of 32.9 W/mK (0.0900 BTU in/hr.ft². °F). Cu-Ni 70/30 Hex Head Bolt are used mainly in marine defense and oil & gas applications.
Cu UNS C71500 Coupling Nut thermal conductivity is 17 BTU/ft2/ft/h/°F @ 70.0 °F (29 W/m-K @ 20.0 °C). Cu-Ni 70/30 Spring Washer has a Density of 0.323 lb/in³ (8.94 g/cm3). The Machinability of ASME SB 152 Cu-Ni Flat Washer (based on free-cutting brass = 100) is 20. Cu-Ni WERKSTOFF NR. 2.0882 Full thread stud has a Shear Modulus (C71500 annealed) of 8300 ksi (57.2 GPa). 70/30 Copper Nickel Flange Bolts has an Elastic Modulus (C71500 annealed) of 22000 ksi (152 GPa). Bolts of 70/30 Copper Nickel are used in cladding material, heating cables, refrigerator and condenser components, air conditioning plants, condensers, electrical resistors, welding backing rings, plates and bases for heat exchangers, switches and plug connectors, propeller sleeves, evaporators in power stations, sea water intakes, feed water heaters, cabled tubes for pneumatic lines, etc.
| End Product | Specification |
|---|---|
| Bolts | ASTM F468 |
| Nuts | ASTM F467 |
| Screws | ASTM F468 |
| Studs | ASTM F468 |
| Size | M3 – M56 | 3/6" to 2" | Custom Sizes |
| Specifications | ASTM B 151 ASME SB 151, ASTM F468 |
| Standard | IS, ASTM, BS and all International Standards |
| Length | 3 mm to 200 mm |
| Type | Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw. |
| Size | M3 – M56 | 3/6" to 2" | Custom Sizes |
| Specifications | ASTM F467 ASME SF 467 |
| Standard | DIN, ASTM, BS and all International Standards |
| Length | 3 mm to 70/30 mm |
| Type | Hex Head Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square Bolts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts. |
| Size | M10 to M100 |
| Length | M02 to M30 |
| Standard | ASTM B151, B152, ASTM F468 |
| Type | Flat Washer, Lock Washer, Sealing Washer, Split Washer, Slot Washer, Machine Washer, Star Washer SPRINGS – Wire Spring & Flat Spring |
US $5.00-$40.00 / Kilogram
Above is an approx price, please contact for final price of Cupro Nickel 70/30 Fasteners
| Cupro Nickel 70/30 Fasteners | Cu-Ni 70/30 Fasteners |
| Copper Nickel 70/30 Welding Studs | Cupro-Nickel 70/30 Plain Pins |
| CuNi 70/30 Lock Nut | Cu-Ni 70/30 Coupler Nuts |
| Cupro Nickel 70/30 Flat Washer | Copper Nickel 70/30 Locking Nuts |
| Copper Nickel 70/30 Square Nut | Cu-Ni 70/30 Pan Head Screw |
| ASTM B151 Silicon Bronze Bolts | Cupro Nickel 70/30 Pan Head Screw |
| Copper Nickel 70/30 Nuts | Cu-Ni 70/30 Bolts |
| Cupro Nickel 70/30 Double Ended Stud | Copper Nickel 70/30 Tie Bar |
| Cu-Ni 70/30 Square Bolts | Cupro Nickel 70/30 Punched Washer |
| Cu-Ni 70/30 Studbolt | Cupro Nickel 70/30 Countersunk Slotted Screw |
| Copper Nickel 70/30 Washers | Cu-Ni 70/30 Stud Bolt |
| Cupro Nickel 70/30 Fender Washer | Copper Nickel 70/30 Bolts |
| ASTM B151 Cap Screw | Cupro Nickel 70/30 Foundation Bolts |
Material | Specification | Standards | Size |
|---|---|---|---|
Cupro Nickel 70/30 | ASTM | ASTM B151 | M10 to M100 |
| Cu-Ni 70/30 | Cu | Pb | Mn | Fe | Zn | Ni |
| 88.6 min | 0.05 max | 1.0 max | 1.8 max | 1 max | 9-11 max |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.1 g/cm3 | 1443 °C (2430 °F) | Psi – 35,000, MPa – 241 | Psi -80,000, MPa -551 | 30 % |
| STANDARD | UNS | WERKSTOFF NR. |
| Cupro Nickel 70/30 | C71500 | 2.0882 |
Feel free to connect with us and get solutions and price quote in an instant.
