90/10 Copper Nickel Flanges

90/10 Cupro Nickel Composite and Silp On Flanges Manufacturer

ANSI B16.5 Cupro Nickel 90/10 Blind Flanges, ASTM A151 Cu-Ni 90/10 Threaded Flanges, 90/10 Cu-Ni WNRF Flanges Exporter in India

90/10 Copper Nickel Flanges Manufacturer in India


90/10 Copper Nickel Flanges

ASME B16.5 Cu-Ni 90/10 Screwed Flanges


ASME B16.5 Cu-Ni 90/10 Screwed Flanges

Cupro Nickel 90/10 Composite Flanges


Cupro Nickel 90/10 Composite Flanges

Cupro Nickel 90/10 Flanges can be welded by making use of coated metal arc welding, spot welding, gas shielded arc welding, brazing, butt welding, seam welding, oxyacetylene welding and soldering. 90/10 Copper Nickel Pipe Flanges thermal conductivity is 32.9 W/mK (0.0900 BTU in/hr.ft². °F). Cu-Ni 90/10 Silp On Flanges are used in electrical engineering for plug connectors, light-current switches, relays and in sprung contacts. 150# ANSI UNS C70600 Plate Flanges has a Rockwell B Hardness of 69. The Elongation at Break of ANSI B16.5 Werkstoff No 2.0872 Orifice Flange (rolled-H04 for flat products/hard drawn-H80 for tubing) is 11.00% and its Elongation at Break (annealed) is 40%. ASTM A151 Cu-Ni 90/10 Slip On Flanges has a Density of 0.323 lb/in³ (8.94 g/cm3). This flange material is used in various application areas such as feedwater heaters, heat exchangers, oil coolers, power stations, switches and plug connectors, control and load resistors, electrical resistors, pipelines in shipbuilding, housings for electrical sub-assemblies, fasteners and boat hulls.

ANSI B16.5 Cupro Nickel 90/10 Socket Weld Flanges specifications are obtainable in various thicknesses, specifications and grades, based upon different needs for use in various applications. Cu-Ni 90/10 Threaded Flanges are used in navigation instruments and in electromagnetic switches. The Chemical Composition of ASME SA151 Cu-Ni 90-10 WNRF Flanges is Cu 71.25-76.5, Fe ≤ 0.20, Pb ≤0.050, Mn ≤ 1.0, Ni 23.5-26.5 and Zn ≤ 1.0. The Molecular Formula of Cupro Nickel 90/10 Blind Flanges is ‎CuNi. Copper Nickel Grade 90/10 Weld Neck Flange is used in heating cables, electrical resistors, desalination plants, cladding material, finned tubes, solder frames, process equipment, measuring instruments, paper machine construction, food and drink industry etc.

Table of content


Send Enquiry

90/10 Copper Nickel Flanges specifications

Specifications ASTM / ASME SB 61 / 62 / 151 / 152
Material NAVINIC 10® CuNi10Fe1Mn
Dimensions ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc

US STANDARDS

ANSI
NAVSEA 810 - 4715319
Slip On Flange 1A
Socket Weld Flange 2A
Socket Weld Flange 2C (Butterfly)
Slip On Flange 5A
Socket Weld Flange 5B
Socket Weld Flange 5C
Socket Weld Flange 9C
Cupro Nickel Composite Flanges

INNER FLANGES

Material :
NAVINIC 10® CuNi10Fe1Mn

Dimension :
DIN 86037 or similar

OUTER FLANGES

Material :
Carbon steel A37 or A105
(Galvanised or epoxy coated on request)

Dimension :
ISO NP10 - DIN 86037

Standard ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size 1/2" 36"
Class / Pressure 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Grades Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640

Cu-Ni 90/10 Industrial Flanges manufacturer in India offers best price of following types

Copper Nickel 90/10 Slip On Flanges


Copper Nickel 90/10 Slip On Flanges

Copper Nickel 90/10 Socket Weld Flanges


Copper Nickel 90/10 Socket Weld Flanges

Cuni 90/10 Socket Weld Flange


Cuni 90/10 Socket Weld Flange ( Butterfly)

Copper Nickel 90/10 SWRF Flange


Cupro Nickel 90/10 Socket Weld Flange (Fig 5B)

Copper Nickel 90/10 Composite Flanges


Copper Nickel 90/10 Composite Flanges

Copper Nickel 90/10 Clad Flanges


Copper Nickel 90/10 Clad Flanges

Cuni 90/10 Overlay Flanges


Cuni 90/10 Overlay Flanges

Cupro Nickel 90/10 Thread Flange


Cupro Nickel 90/10 Thread Flange

Standard table for Cupro Nickel 90/10 Screwed Flanges & 90/10 Copper Nickel Pipe Flanges

NAVINIC 10®
CuNi10Fe1Mn
DIMENSIONAL STANDARD DIN2527 / DIN2576 / DIN2632 / DIN2633 / DIN2635 / DIN2642 / DIN86033 /
DIN86036 / DIN 86037 / DIN86067 / DIN86069 / DIN86148
EEMUA145
STF 330421 / C610
STF330430 / C513
BS4504
VG85536
VG85387
EUROPE MATERIAL
STANDARD
2.0872 / 2.1972
UNS7060X
CW352H
CN102
NES779 / DEF STAN 02-779
DELIVERY
CONDITION
.10 / .11 / O / O60 / M
DIMENSIONAL STANDARD ANSI B16.1 / ANSI B16.5 / ANSI B16.9 / ANSI B16.36 / ANSI B16.47 / ANSI B16.48
810-4715319
DF314115 / 252943
UNITED
STATES
MATERIAL
STANDARD
UNS C70600 / C70610 / C70620
ASTMB151 / MILC15726F / MILC24679SH
DELIVERY
CONDITION
O / O60

Specifications for C706 Cupro Nickel 90/10 Flanges

ASTM ASME Military
Forging MIL-C-24679


Solid Copper-Nickel UNS C70600 Plate Flanges, Classes 150, 250, & 300

  • ANSI B16.5 NAVSEA
  • ANSI B16.5 Weld Neck
  • ANSI B16.5 Slip-On
  • ANSI B16.5 Socket Welding
  • ANSI B16.5 Blind
  • ANSI B16.5 Overlay
  • ANSI B16.5 Composite
  • ANSI B16.5 Clad
  • Socket Weld Commercial Flange, Class 300
  • Socket Weld Navy Flange, 150, 250 Pound Class


Cupro Nickel 90/10 Forged Flanges Manufacturer
s also stock following flanges in special sizes

(Sizes 1/8" – 36")

Cupro Nickel 90/10 Slip-On Flanges 90/10 Cu-Ni Threaded Flanges
Cu-Ni 90/10 Weld Neck Flanges Copper Nickel 90/10 Socket Weld Flanges
90/10 Cupro Nickel Blind Flanges 90/10 Cu-Ni Reducing Flanges
Cu-Ni UNS C70600 Lap Joint Flanges Cupro Nickel UNS C70600 Plate Flanges
Cu-Ni WERKSTOFF NR. 2.0872 Orifice Flanges ASME B151 90/10 Copper Nickel Forged Flanges
ASME SA151 90/10 Ring Type Joint Flanges Cu-Ni 90/10 Square Flanges
Cu-Ni 90/10 Raised Face Weld Neck Flanges ASTM A151 Cupro Nickel 90/10 Composite Flanges


Solid Forged 90/10 Copper Nickel Flanges, Classes 150, 200, 300 and 400.

Slip-On
ANSI B16.5
AWWA Large Diameter
Weld Neck
NAVSEA 810-1385992
MIL-F-20670
Blind
ANSI B16.5
(Dimensions to your sketch)
Socket Weld
ANSI B16.5
NAVSEA 810-4715319-Butterfly Type (2c)
MIL-F-20042
Threaded
ANSI B16.5
ANSI B16.24

Silver-Brazing
NAVSEA 810-1385947
MIL-F-20042
Face Fed or Grooved for Ring
Commercial 150 PSI, 300 PSI Navy 150 PSI, 250 PSI Special Order, Spectacle Blind
Cu-Ni Forged Flange (Weld Neck, Slip-On, Socket Weld) Blind, Special Flanges, Overlay, Composite, Clad Flanges
Cupro Nickel Slip On Flanges Cu-Ni Raised Face Weld Neck Flanges Cu-Ni Blind Flanges
A151 Copper Nickel Orifice Flanges Copper Nickel Socket weld Flanges Cu-Ni Threaded Flanges
Cupro Nickel Long weld Neck Flanges BS4504 Copper Nickel RTJ Flanges Cupro Nickel Reducing Flanges


Other Types of 90/10 Cupro Nickel Pipe Flanges

  • Cupro Nickel 90/10 Slip On Flanges
  • Cu-Ni 90/10 Raised Face Slip On Flanges
  • 90/10 Copper Nickel Slip On Plate Flanges
  • 90/10 Cupro Nickel Slip On Flanges
  • Cu-Ni UNS C70600 Slip On Flanges
  • ASME SA151 90/10 Slip On Flanges
  • Cupro Nickel 90/10 Threaded Flanges
  • Cupro Nickel 90/10 Forged Flanges
  • Cu-Ni 90/10 Forged Flanges
  • 90/10 Copper Nickel Forged Flange
  • 90/10 Cu-Ni Forged Flange
  • Cu-Ni 90/10 Threaded Flanges
  • 90/10 Cu-Ni Threaded Flanges
  • Cupro Nickel 90/10 Weld Neck Flanges
  • Cu-Ni 90/10 Raised Face Weld Neck Flanges
  • 90/10 Copper Nickel Weld Neck Flanges
  • 90/10 Cu-Ni Weld Neck Flange
  • Cu-Ni UNS C70600 Weld Neck Flanges
  • Cupro Nickel 90/10 Blind Flanges
  • 90/10 Cu-Ni Blind Flanges
  • 90/10 Cupro Nickel Orifice Flanges
  • 90/10 Copper Nickel Blind Flange
  • Cupro Nickel UNS C70600 Blind Flanges
  • ASTM A151 90/10 Cu-Ni BLRF Flanges
  • Cupro Nickel 90/10 Orifice Flanges
  • Cu-Ni 90/10 Orifice Flanges
  • Cu-Ni WERKSTOFF NR. 2.0872 RTJ Flanges
  • 90/10 Copper Nickel Ring Type Joint Flange
  • BS4504 Copper Nickel 90/10 RTJ Flanges
  • Cupro Nickel UNS C70600 Forged Flanges
  • Cu-Ni DIN 2.0872 Forged Flanges
  • Cu-Ni WNR 2.0872 Threaded Flanges
  • Cu-Ni DIN 2.0872 Long weld Neck Flanges
  • ASTM A151 90/10 Copper Nickel Long weld Neck Flanges
  • 90/10 Cupro Nickel Threaded Flanges
  • 90/10 Cu-Ni Reducing Flange
  • Cu-Ni 90/10 Socket weld Flanges
  • Cu-Ni 90/10 Long weld Neck Flanges
  • Cupro Nickel 90/10 RTJ Flanges
  • Cu-Ni 90/10 Ring Type Joint Flanges
  • 90/10 Cupro Nickel RTJ Flanges
  • Cu-Ni UNS C70600 RTJ Flanges
  • Copper Nickel 90/10 Reducing Flanges
  • 90/10 Cuni Long weld Neck Flanges
  • 90/10 Cupro Nickel Long weld Neck Flanges
  • Cupro Nickel UNS C70600 Threaded Flanges
  • Copper Nickel 90/10 Long weld Neck Flanges
  • Cu-Ni WERKSTOFF NR. 2.0872 Blind Flange
  • A151 90/10 Copper Nickel Orifice Flanges
  • Cupro Nickel 90/10 Socket weld Flanges
  • 90/10 Copper Nickel Socket weld Flanges
  • 90/10 Cupro Nickel Socket weld Flanges
  • Cu-Ni UNS C70600 Socket weld Flanges
  • ASTM A151 Cupro Nickel 90/10 Forged Flanges
  • Copper Nickel UNS C70600 Reducing Flanges
  • Cu-Ni WERKSTOFF NR. 2.0872 Orifice Flanges
  • Cu-Ni WERKSTOFF NR. 2.0872 Reducing Flange
  • ASTM A151 Cupro Nickel 90/10 Reducing Flanges
  • Cupro Nickel WERKSTOFF NR. 2.0872 SWRF Flanges
  • ASME B151 90/10 Copper Nickel Socket weld Flanges
  • Copper Nickel 90/10 Raised Face Blind Flanges
  • Cu-Ni WNR 2.0872 Weld Neck Flange
  • Cu-Ni WERKSTOFF NR. 2.0872 45 SORF Flanges
  • ASTM A151 90/10 Copper Nickel WNRF Flange
  • 90/10 Copper Nickel Orifice Flanges
  • Cu-Ni UNS C70600 Orifice Flanges
  • ASTM A151 Copper Nickel 90/10 Threaded Flanges

90/10 Copper Nickel Flanges price

US $10.00-$50.00 / Kilogram

Above is an approx price, please contact for final price of 90/10 Copper Nickel Flanges

90/10 Copper Nickel Flanges properties


Chemical Composition of ANSI B16.5 Cupro Nickel 90/10 Pipe Flanges

Grade Cu Mn Pb Ni Fe Zn
Cupro Nickel 90/10 88.6 min 1.0 max 0.05 max 9-11 max 1.8 max 1 max

Mechanical Properties Cupro Nickel 90/10 Screwed Flanges

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
0.323 lb/in3 at 68 F 2260 F 50000 psi 20000 psi 30 %

Equivalent Grades for 90/10 Cupro Nickel Welded Flanges

STANDARD WERKSTOFF NR. UNS
Cupro Nickel 90/10 2.0872 C70600


90-10 cuni flanges manufacturers in India
Exporter of cuni 90/10 flange