Cupro Nickel Round Bar Manufacturer

Copper Nickel Bar suppliers

Manufacturer of Cu-Ni Rods, ASTM B151 Cupro Nickel Hex Bar, CuNi Bright Bar and Copper Nickel Flat Bar

Cupro Nickel Round Bar Manufacturer


Cupro Nickel Round Bar

Cupro Nickel Flat Bar


Cupro Nickel Flat Bar

Hexagonal Copper Nickel Bars


Hexagonal Copper Nickel Bars

Sunflex Metal is India's leading manufacturer and supplier of Copper Nickel Bar. Cupro Nickel Round Bar composition is that of copper and nickel, to which iron and manganese have been added, as agents of strength. Cuni Bar has a Tensile Strength (annealed) of 52000 psi (359 MPa) and it has a Tensile Strength (rolled-H04 for flat products/ hard drawn-H80 for tubing) of 78000 psi (538 MPa). Cupro Nickel welding rods has a Shear Modulus (C71500 annealed) of 8300 ksi (57.2 GPa). Copper Nickel Bar is in big demand in applications like electrical resistors, tube mounting material, terminals, control and load resistors, heating elements and in thermocouples. Binary Copper Nickel Alloy Rods are used along with materials that have been alloyed with iron and manganese, in automobile construction, metal goods industries, measuring instruments, aircraft construction and sheet goods industries.

Copper Nickel Round Bar has a Rockwell B Hardness of 69. The Poisson’s Ratio of Copper nickel (C71500 annealed) is 0.325. The Elongation at Break of Cuni Round Bar (rolled-H04 for flat products/hard drawn-H80 for tubing), is 11.00% and its Elongation at Break (annealed), is 40%. The Thermal Expansion Co-efficient of Copper Nickel flat bar (@20-300°C/68-572°F) is 9.00 µin/in °F (16.2 µm/m °C). Cuni round rod has a Thermal Conductivity of 32.9 W/mK (0.0900 BTU in/hr.ft². °F). Cupro Nickel hexagon bar uses are many, as due to copper being added to nickel, the corrosion resistance and strength of copper is increased. As such, Coppernickel Bar offers fantastic resistance to corrosion from seawater and it also has low macrofouling rates and so it finds immense use in marine applications. Bars made from Copper Nickel round rod are used in plates, seawater lines, heat exchanger bases and tubes.

Table of content


Send Enquiry

Copper Nickel Bar specifications

Copper Nickel Round Bar Specification

SpecificationsASTM B151, ASME SB151
StandardsMIL-C-15726F, ASTM B 151, Tempers 060 Soft & H01 Hard
UNS Designation Number70/30 (UNS C71500), 90/10 (UNS C70600)
Nominal Chemicals70-30: Copper 69.5%, Nickel 30.0%, Iron 0.5%90-10: Copper 88.6%, Nickel 10.0%, Iron 1.4%
Machinability70-30: 2090-10: 20
Average Tensile Mechanical Properties70-30: 50000 psi90-10: 40000 psi
Average Yield Mechanical Properties70-30: 20000 psi90-10: 18000 psi
Average Elongation Mechanical Properties70-30: 30 %90-10: 30 %
DimensionsEN, DIN, JIS, ASTM, BS, ASME, AISI
Range
5 mm To 500 mm thick in 100 mm TO 6000 mm
Cu-Ni Round Bars
6 mm to 120 mm.
Cu-Ni Square Bars10 mm to 200 mm.
FinishBright, Black, Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish, 2B
Length100 mm to 3660 mm Long
FormRod, Round, Square, Rectangle, Hex (A/F), Billet, Ingot, Forging etc.

Copper Nickel Alloys Round Bar Standard

AlloyDN Trade NameMaterial No.UNS SpecificationASTM SpecificationDIN Specification
CW352HCuNi10Fe1Mn(2.0872)C70600ASTM B151
CW354HCuNi30Mn1Fe(2.0882)C71500ASTM B151
CuNi44Mn1Vernicon(2.0842)C72150DIN 17471

Copper Nickel Bar types

Manufacturing Copper Nickel Bars in following forms

ASTM B151 Cu-Ni Flat Bar


ASTM B151 Cu-Ni Flat Bar

Cupro Nickel Bright Bar


Cupro Nickel Bright Bar

Copper Nickel Hexagonal Bar


Copper Nickel Hexagonal Bar

Cu-Ni Hex Bar


Cu-Ni Hex Bar

ASTM B151 Cupro Nickel Square Bars


ASTM B151 Cupro Nickel Square Bars

ASTM B151 Cu-Ni Rectangular Bar


ASTM B151 Cu-Ni Rectangular Bar

Copper Nickel Polished Bar


Copper Nickel Polished Bar

ASME SB151 Cu-Ni Threaded Bars


ASME SB151 Cu-Ni Threaded Bars

Cupro Nickel Hollow Bar


Cupro Nickel Hollow Bar

CuNi Rod


CuNi Rod

Copper Nickel Round Rod


Copper Nickel Round Rod

Copper Nickel Alloy Round Bars


Copper Nickel Alloy Round Bars

Copper Nickel Bar exporter in India

BAR - Round, Hex and Square
Range : 10 mm To 150 mm Dia in 100 mm TO 1000 mm Length
Cupro Nickel Solid Bar: 1/4" - 12" diameter
Test Certificate : Mill Test Certificate as per EN 10204 / 3.1

Cupro Nickel Bar grades

Specifications Copper Nickel Alloy Bars

ASTMASMEMilitary
BarASTM B151
ASTM B122
ASME SB-151
ASME SB-122
MIL-C-15726

Cuni Bars Applications & Uses

  • Fittings
  • Flanges
  • Fasteners
  • Marine hardware
  • Condenser taper tube plugs

Copper Nickel Rod suppliers

Specifications Copper Nickel Alloy Rod

ASTMASMEMilitary
RodASTM B151ASME SB-151MIL-C-15726
Rod, WeldingAWS A5.15


Physical Properties for Copper Nickel Round Bar

Density @ 68° F0.323 lb/in3
Melting Range2140-2265o F
Hot FormabilityGood
Cold FormabilityGood
Machinability rating (C360 = 100)20
BrazingExcellent
SolderingExcellent
Gas-shielded arc weldingExcellent
Oxy-acetylene weldingGood
Carbon-arc weldingNot recommended
Coated metal-arc weldingGood
Resistant welding: spot and seamGood
Resistance Welding: buttGood

Compositions for Cupro Nickel Bar

COMMERCIAL

UNS No.Copper + SilverNickel + CobaltManganeseLeadIronZincPhosphorusSulfurCarbon
C71500remainder29.0-33.01.0 max0.05a max0.40-1.01.0a
C7152065.0 min29.0-33.01.0 max0.020.40-1.00.50.02 max0.02 max0.05 max

For subsequent welding application, max levels are: Zinc 0.50, Lead 0.02, Phosphorus 0.02, Sulfur 0.02, Carbon 0.05

MIL-C-15726

UNS No.CopperNickel + CobaltManganeseLeadIronZincPhosphorusSulfurCarbonCu + plus elements with specific limits, min
C7150065.0 min29.0-33.01.0 max0.02 max0.40-1.00.50 max0.02 max0.02 max0.05 max99.5

MIL-T-16420

UNS No.Copper + SilverNickel + CobaltManganeseLeadIronZincPhosphorusSulfurCarbonCu + plus elements with specific limits, min
C7150065.0 min29.0-33.01.0 max0.02 max0.40-1.00.50 max0.02 max0.02 max0.05 max99.5

MIL-T-15005

UNS No.Copper + SilverNickel + CobaltManganeseLeadIronZincPhosphorusSulfurCarbon
C71500remainder29.0-33.01.0 max0.02 max0.40-1.00.50 max0.02 max0.02 max0.05 max

Copper Nickel Bar price

US $4.00-$4.50 / Meter

Above is an approx price, please contact for final price of Copper Nickel Bar

Copper Nickel Bar properties

NAVINIC 10® CuNi10Fe1Mn
NAVINIC 30® CuNi30Mn1Fe
STANDARDEN12163 / EN12165 / EN12167 / EN12420
DIN 17672
BS2874
DEF STAN 02-879 ANNEX C / NES779 / DEF STAN 02-779
EN12163 / EN12165 / EN12167 / EN12420
DIN17672
BS2874
DEFSTAN 02-879 ANNEX B / NES780 / DEF STAN 02-780
STF 2255 / B007
EUROPEMATERIAL
STANDARD
C352H
2.0872
CN102
CW354H
2.0882
CN107
DELIVERY CONDITIONM / R280 / .10 / O / MM / R370 / .1O / O / M
STANDARDASTM B122 / ASTM B124 / ASTM B151 / ASTM B171
MILC 15726F / MILC 24679SH
ASTM B122 / ASTMB124 / ASTM B151 / ASTMB171
MILC 15726F / MILC 24679SH
UNITED STATESMATERIAL
STANDARD
UNS C70600 / C70610 / C70620UNS C71500 / UNS C71520
DELIVERY CONDITIONO / O60 / H01 / M30O / O60 / H01 / M30

Dealer & distributor of Copper Nickel Forged Bars, Cuni Square Bar, Coppernickel Threaded Bar, Cu-Ni Hot Rolled and Cold Drawn Polished Bar, Cupro Nickel Black Bars