EEMUA 146 PIPE FITTINGS

EEMUA 146 UNS 7060x Elbow manufacturer in India

eemua 146 pipe fittings

The EEMUA 146 grade fittings are copper-nickel alloy specifications. EEMUA 146 fittings are designed to route, change, and branch connections. These fittings play a critical role in influencing the characteristics of the flow in the system. The EEMUA 146 Pipe Fittings have enhanced corrosion and oxidation resistance properties. These fittings have good anti-fouling properties and showcase enhanced mechanical properties. The EEMUA 146 Copper Nickel Tee is designed with a three-sided opening allowing for media to move across two channels. The versatile EEMUA 146 Tee is produced with two outlets and one inlet that is attached at 90 degrees to the main pipeline. These tees are utilized in equal and reducing sizes. In an EEMUA 146 Reducing Tee one of the channels is made of unequal size, allowing for reduced flow in one of the openings. These tees are available in eccentric and concentric reducers. The EEMUA 146 UNS 7060x Concentric Reducer is a cone-shaped grade that reduces the pipe size from the center. These reducers have a matched center line. EEMUA 146 Eccentric Reducers reduce the pipe from the sides. These reducers possess a mismatched centreline and require to be aligned properly for an even flow of media.

The EEMUA 146 UNS 7060x Elbow is a common type of fitting that is used to change the direction of the flow in the system. These elbows are designed in short or long based on their radius of curvature. An EEMUA 146 Copper Nickel Long Radius Elbow has 1.5 times the radius of curvature than the outer diameter of the pipe. These elbows allow for a swift flow of media in different conditions. The EEMUA 146 Butt Weld End Caps are primarily used to close the ends of the hydraulic system to terminate the flow of fluids and gases. They also cut off contaminants from entering the grade. EEMUA 146 Stub End is a short piece of pipe having a flared end and can be used as an alternative to a standard flange.

MANUFACTURER OF EEMUA 146 COPPER NICKEL LONG RADIUS ELBOW IN 90/ 45 DEGREE WITH 100% RADIOGRAPHIC TEST REPORTS

TABLE OF CONTENT

EEMUA 146 PIPE FITTINGS SIZES

Size in Inch
0.5 2.5 8 20
0.75 3 10 22
1 3.5 12 24
1.25 4 14  
1.5 5 16  
2 6 18  

COPPER NICKEL EEMUA 146 PIPE FITTINGS SPECIFICATIONS

EEMUA 146 Copper Nickel Tee and Reducing Tee manufacturer in Mumbai, Seamless EEMUA 146 Tee available up to 219mm and welded in 267 mm to 914 mm od

Standard Specification ASME-B16.9, MIL-T-16420K, MSS-SP97, MSS-SP43, DIN86090, DIN28011, DIN86088
Pressure Rating
  • 10Bar, 14BAR, 16BAR, 20BAR
  • MIL-T-16420K: Class 200, Class 500, Class 700
  • PN10, PN14
Manufacturing size range of EEMUA 146 Buttweld Fittings 1/2" - 24"
DN15-DN500
OD 20 to OD 508
or custom
Thickness 1.5 to 15mm
Schedule Sizes SCH5/ 5S, SCH10/ 10S, SCH40/ 40S, STD, SCH80, SCH160
Material Test Certificates (MTC) All Fittings material supplied with MTC EN 10204 3.1, 3.2

EEMUA 146 UNS C70600 PIPE FITTINGS PRICE LIST

EEMUA 146 UNS 7060x Concentric Reducer and EEMUA 146 Eccentric Reducers suitable for 38˚C - 75˚C temperature depends upon the pressure rating

Type Price List (June 2022 to Dec 2022)
88.9 X 2.5 * 57 X 2.5MM Buttweld Tee FOB Price : US $ 12 - US $ 13 per Kg
Buttweld  Elbow 90 DEG FOB Price : US $ 11 - US $ 12 per Kg
Buttweld  Elbow 45 DEG, Seamless FOB Price : US $ 12 - US $ 13 per Kg
Buttweld  Long radius Elbow, 1 X 2.5MM WT FOB Price : US $ 170 - US $ 180 per Kg

TYPES OF EEMUA 146 PIPE FITTINGS

Manufacturer of EEMUA 146 Stub End, Butt Weld End Caps in 16/ 20 bar pressure class, check weight chart and EEMUA 146 Fittings price list in Mumbai

16 BAR CUNI EEMUA 146 UNS C70600 TEE PRESSURE RATING

tee dimensions
Outside diameter of pipe Equal tee
16 BAR Tee
ØD Wall Theoretical
thickness C A weight
actual nominal e mm mm Kg/ piece
mm inch mm
20mm 0.5 Inch - - - -
25mm 0.75 Inch - - - -
30mm 1 Inch 2.5 38 38 0.18
38mm 1.25 Inch 2.5 48 48 0.29
44.5mm 1.5 Inch 2.5 57 57 0.43
57mm 2 Inch 2.5 64 64 0.57
76.1mm 2.5 Inch 2.5 76 76 0.88
88.9mm 3 Inch 2.5 86 86 1.16
108mm 4 Inch 3 105 105 2.09
133mm 5 Inch - - - -
159mm 6 Inch 3 143 143 4.07
193.7mm 7 Inch - - - -
219.1mm 8 Inch 4 178 178 17
267mm 10 Inch 4.5 216 216 24.9
323.9mm 12 Inch 5.5 254 254 43.3
368mm 14 Inch 6.5 279 279 64.05
419.1mm 16 Inch 7 305 305 96.4
457.2mm 18 Inch 8 343 343 135.3
508mm 20 Inch 8.5 381 381 175.3
610mm 24 Inch 10.5 432 432 265.9

20 BAR EEMUA 146 UNS 7060X TEE PRESSURE RATING

tee dimensions
OD Equal Tee
20BAR Tee Fittings
  Wall Theoretical
thickness C A weight
Actual nominal e mm mm Kg/piece
mm inch mm
20mm 0.5 Inch
25mm 0.75 Inch
30mm 1 Inch 2.5 38 38 0.18
38mm 1.25 Inch 2.5 48 48 0.29
44.5mm 1.5 Inch 2.5 57 57 0.43
57mm 2 Inch 2.5 64 64 0.57
76.1mm 2.5 Inch 2.5 76 76 0.88
88.9mm 3 Inch 2.5 86 86 1.16
108mm 4 Inch 3 105 105 2.09
133mm 5 Inch
159mm 6 Inch 3.5 143 143 4.74
193.7mm 7 Inch
219.1mm 8 Inch 4.5 178 178 19.1
267mm 10 Inch 5.5 216 216 30.4
323.9mm 12 Inch 7 254 254 55.1
368mm 14 Inch 8 279 279 78.8
419.1mm 16 Inch 9 305 305 124
457.2mm 18 Inch 9.5 343 343 160.65
508mm 20 Inch 11 381 381 226.9
610mm 24 Inch 13 432 432 329.2

CUNI EEMUA 146 UNS 7060X STUB END DIMENSIONS

stub end dimensions

EEMUA 146 PIPE FITTINGS TOLERANCES

fitting tolerance

EEMUA 146 UNS C7060X BUTT WELD FITTINGS STANDARD

BUTT WELD FITTINGS DIN ASME/ ANSI
ELBOWS LONG RADIUS FITTINGS DIN 86090 ANSI/ ASME B16.9
ELBOWS SHORT RADIUS FITTINGS DIN 86090 ANSI/ ASME B16.9
EQUAL TEE FITTINGS DIN 86088 ANSI/ ASME B16.9
REDUCING TEE FITTINGS DIN 86088 ANSI/ ASME B16.9
CONCENTRIC REDUCER FITTINGS DIN 86089 ANSI/ ASME B16.9
ECCENTRIC REDUCER FITTINGS DIN 86089 ANSI/ ASME B16.9
EQUAL SADDLE FITTINGS DIN 86087
REDUCING SADDLE FITTINGS DIN 86087
END CAPS FITTINGS DIN 28011 ANSI/ ASME B16.9

MOST IMPORTANT TESTS FOR EEMUA 146 PIPE FITTINGS SHOULD PERFORM BY MANUFACTURERS

Destructive Testing Non Destructive Testing
  • Method A - ASTM G48
  • Method C - ASTM G48
  • Method B - ASTM G28
  • ASTM A262 Practice E Corrosion Test
  • Ferrite Determination to ASTM E562
  • Hardness Testing
  • Charpy Impact Testing
  • Tensile Testing to Applicable Specification
  • Metallography
  • Ultrasonic Testing (UT)
  • Radiography
  • Liquid Dye Penetrant Testing (DPI)
  • Product Material Identification (PMI)
  • Niton XL2 980 Goldd Alloy Analyzer
  • Fischer Ferrite Testing

APPLICATION OF EEMUA 146 PIPE FITTINGS

TEMPERATURE AND WORKING PRESSURE OF EEMUA 146 COPPER NICKEL FITTINGS

Type of EEMUA 146 fitting Size range 16 bar fitting 20 bar fitting
    38˚C 50˚C 75˚C 100˚C 38˚C 50˚C 75˚C 100˚C
Copper Nickel EEMUA 146 Butt Weld fittings 1 inch - 4 inch
30mm - 108mm
Use 20 bar 20.0 19.7 18.6 17.3
EEMUA 146 UNS C70600 Butt Weld fittings 6in - 36in/
159mm - 914mm
16.0 16.0 16.0 15.7 20.0 19.7 18.6 17.3
Cuni EEMUA 146 UNS C70600 Socket weld fittings ½in/ - 2in
16mm - 57mm
Use 20 bar 20.0 19.7 18.6 17.3
EEMUA 146 UNS 7060X Capillary brazed fittings ½in/ - 2in
16mm - 57mm
20.0 19.7 18.6 17.3
Cuni EEMUA 146 UNS 7060X Compression fittings ½in/ - 2in
16mm - 57mm
- - - -

EEMUA 146 PIPE FITTINGS CHEMICAL COMPOSITION

Copper Nickel EEMUA 146 Fittings MSS SP97, MSS SP43
Element Min Max
Carbon - 0.050
Manganese 0.500 1.000
Phosphorus - 0.020
Sulphur - 0.020
Nickel 10.000 11.000
Copper Rem -
Lead - 0.010
Iron (Fe) 1.500 2.000
Zinc - 0.200
Total Impurities (other than copper (including silver) iron, nickel (including cobalt) and manganese) - 0.300

COPPER NICKEL EEMUA 146 REDUCER WEIGHT CHART

reducer fittings weight

Request a Quote



- Exporting Worldwide -

Request a Quote

Have any custom cupronickel product requirement in mind?

Feel free to connect with us and get solutions and price quote in an instant.

GET A QUOTE INSTANTLY