Extruded Copper Profiles

OFE C10100 Copper Pipe Sections and Copper Hollow Sections supplier in Mumbai

Stockist & distributor of Copper Drip Edge Profiles, Extruded Copper Sections, ASTM B187 ETP Copper T Sections, DHP / DLP, DLP C12000 Copper Sections exporter in India.

Extruded Copper Profiles


Extruded Copper Profiles

Copper Drip Edge Profiles


Copper Drip Edge Profiles

Copper Sections


Copper Sections

Table of content


Send Enquiry

Copper Profile / Section Specifications:

Producing with strict dimensional tolerances such as C-connectors, L-shape, Y-shape, H-shapes as well as profiles for heat sinks etc.

Product Copper Extruded Profile and Sections
Specifications ASTM B133, ASTM B124, ASTM B187, IS: 191, 613 & 1897
Standard EN 12167:2016, As Per IS -4171, 1s-288,IS-613 Standards
Grade C101 – ETP copper and oxygen free copper, DHP, DLP, C10100, C10200, C10300, C10400, C10500, C10700, C11000, C11300, C12000, C12200, C14300, C14420, C14530, C19210, C19400
Thickness Extruded: 4mm Min.
Drawn: 3mm Min.
Length Extruded: 50ft Max weight limit upto 55Kgs
Drawn: 10ft Max. weight limit upto 55Kgs
Machining process CNC machining
Tolerance Extruded: +0.30" Min. on any dimension
Drawn: +0.005 Min. on any dimension
Circumscribing circle diameter For Extruded Product: 4.125" Max
For Drawn Product: 4" Max Cross Sectional - 1/2 sq. Inch minimum.
Cross sections 80 mm2 to 150 mm2
Conductivity Above 97% IACS min in Half Hard
Above 99.95% in annealed
Purity Copper - 99.85%
Specifications (DHP)
Specifications (DLP)
Copper: 99.99%, O
2: < 10 ppm
Copper: 99.95%, O
2: < 100 ppm
Shapes Profiled Tubes and Rods in Reeded, Oval, Rectangle, Polygon, hex, round, Square and Twisted shape, L-shape, Y-shape, H-shape, etc.

Types of Copper Profile / Sections

We are high quality DHP Copper Profile stockist which includes some of the best C11000 DLP Copper Profiles Sections mentioned below

Extruded Copper Profiles


Extruded Copper Profiles

Copper Drip Edge Profiles


Copper Drip Edge Profiles

Copper Sections


Copper Sections

Copper Hollow Sections


Copper Hollow Sections

Copper Pipe Sections


Copper Pipe Sections

Extruded Copper Sections


Extruded Copper Sections

Copper T Sections


Copper T Sections

Copper Box Sections


Copper Box Sections

Copper Profiles and Sections Grades

SMI Copper is an Indian based ETP Copper Profile supplier of any quantity of Oxygen Free Copper Profile at trade prices,

Supplying to more than 30 countries like UK, Poland, Singapore, Malaysia, China, USA, Sweden, Israel, Germany, Russia, France, Italy, Canada & Australia, Oman, Qatar, UAE & Saudi Arabia.

Nearest British Standard Equivalent

European Material Designation

Copper Description

C101

CW004A

Cu ETP

C101

CW011A

Silver bearing copper Ag 0.03 - 0.05

C101

CW012A

Silver bearing copper Ag 0.06 - 0.08

C101

CW013A

Silver bearing copper Ag 0.08 - 0.012

C103

CW008A

Oxygen free copper

C109

CW118C

Free machining copper (added tellurium)

C110

CW009A

Oxygen free copper

C111

CW114C

Free machining copper (added sulphur)

Chemical Composition of DHP / DLP Copper Profile / Section

Nation China USA U.K Germany Japan
Standard No. GB ASTM B170 BS 6017 DIN 1787 JIS H2123
Classification TU0 TU1 Grade1 C10100 Grade 2 C10200 Cu-OFE C103 Cu-OF C110 OF-Cu 2.0040 Grade1 C1011 Grade2 C1020
Chemical Composition Cu+Ag (%Min) 99.99 99.9 99.99 99.95 99.99 99.95 99.95 99.99 99.98
O2 P (PPM) 10Max 3max 10max N/A 5Max 3Max 10Max N/A 10Max 3Max NA NA NA NA 10Max 3max 10max N/A

Design Standards of Copper Profile / Sections

European Standard Polish Standard German Standard
EN 12167:2016 EN 13600:2016 PN 75/H93623 DIN 40500 DIN 17672
EN 13605:2016
Temper Cu-DHP Cu-ETP M1E, M2R E-Cu57 SF-Cu
extruded M - pp p -
drawn M D pc zh zh
soft - R200/H035 r F20 F20
half hard R240/H065 R240/H065 z4 F25 F24
hard R280/H085 R280/H080 z6 F30 F29

Oxygen Free Copper Profile / Section Chemical Composition :

Element
Cu(1,2,3) Pb Zn Fe P Ag As O Sb Te
(1) This is a high conductivity copper which has, in tde annealed condition a minimum conductivity of 100% IACS except for Alloy C10100 which has a minimum conductivity of 101% IACS.
(2) Cu is determined by tde difference between tde impurity total and 100 %. For alloy C10100 tde Cu value is exclusive of Ag.
(3) The following additional impurity maximum limits shall apply: Bi 1ppm (0.0001%); Cd 1ppm (0.0001%); Mn 0.5ppm (0.00005%); Ni 10ppm (0.0010%); Se 3ppm (0.0003%); S 15ppm (0.0015%); Sn 2ppm (0.0002).

PHYSICAL PROPERTIES OF PURE COPPER SECTIONS

Density (g/cc) 8,96  
Thermal Conductivity (W/cm oK) 4,01
Specific Heat (J/g oK) 0,38
Coefficient of linear thermal expansion / K-1 16,5E-6
Atomic Mass Average 63,546
Melting Point 1357,75 oK
1084,6 oC
1984,3 oF

MECHANICAL PROPERTIES OF COPPER PROFILE & SECTIONS

According to EN 13601
Alloy Temper

Tensile Strength

(MPa)

Yield Strength

(MPa)

Elongation

 (%)

Hardness

(HB)

Conductivity

(MS/m)

Cu-ETP D (Hard as drawn) - - - - 56 min
H035 - - - 35 -65 58 min
R200 200 min 120 max 25 min - 58 min
H065

-

- - 65 -90 58 min
R230 230 min 160 min - - 58 min
R250 250 min 200 min 8 min - 58 min
H085 - - - 85 -110 57 min
R300 300 min 260 min 5 min - 57 min
H100 - - - 100 min 57 min

According to ASTM B 187

Alloy Temper

Rod & Bar Strength

(mm)

Elongation

(%)

Hardness

(HV)

Conductivity

(MS/m)

Cu-ETP O60 All sizes 25 min 57 max 58 min

H04

 

For rod: Up to 10 incl.

12 min - 56 min
Over 10 to 25 incl. 12 min 89 min 56 min
Over 25 to 50 incl. 15 min 83 min 56 min
Over 50 to 75 incl. 15 min 71 min 57 min
Over 75 15 min - -

For bar: Up to 10 incl. thickness and up to 110 incl. in width

10 min 89 min 56 min
All other sizes 15 min 71 min 57 min

According to JIS H 3250

Alloy Temper

Rod & Bar Strength

(mm)

Tensile Strength

(MPa)

Elongation

(%)

Conductivity

(MS/m)

Cu-ETP O 6 or over up to and incl. 10 195 min 30 min 58 min
½ H 6 or over up to and incl. 25 245 min 15 min 57 min
over 25 up to and incl. 50 225 min 20 min 57 min
over 50 up to and incl. 75 215 min 25 min 57 min
H 6 or over up to and incl. 25 275 min - 56 min

According to JIS H 3140

Alloy Temper

Rod & Bar Strength

(mm)

Tensile Strength

(MPa)

Elongation

(%)

Conductivity

(MS/m)

Cu-ETP O 2.0 or over up to and incl. 30 195 min 35 min 58 min
½ H 2.0 or over up to and incl. 30 215-275 25 min 57 min
¼ H 2.0 or over up to and incl. 20 245-315 15 min 57 min
H 2.0 or over up to and incl. 10 275 min - 56 min

Other types of Copper Profiles & Sections in Stock

  • ETP Grade Copper Profile / Section
  • CW004A ETP Copper T Section
  • ETP Copper Rectangular Section
  • Copper Alloy C11000 Extruded Profiles
  • Electrolytic Tough Pitch Copper Profiles
  • DIN 2.0060 ETP Copper Profile / Section
  • ETP Copper Profile / Section
  • CDA 110 Cu-ETP Copper Profile
  • ASTM B187 DLP Copper Rectangular Section
  • OFHC C10200 Copper Extruded Profiles
  • ASTM F68 OFC Sections
  • OFC Grade Copper T Section
  • Cu-OF CW008A Profiles Sections 
  • Oxygen Free Silver Bearing Copper Profile / Section
  • ASME SB187 Oxygen Free Copper Profiles
  • Electrolytic Tough Pitch Copper Section
  • ASME SB187 ETP Copper Profile / Section
  • ETP C110 Copper Profile / Section
  • Electrolytic Tough Pitch Copper C11000 Profiles
  • WNR 2.0076 DLP Copper J Section
  • UNS C11000 Copper Profile / Section
  • ETP Copper Profile / Section
  • ASTM B187 ETP Copper Hollow Section
  • C11000 ETP Copper C Section Supplier
  • ASTM B124 DHP Copper Alloy Hollow Section
  • ASTM B187 OFC Profiles
  • Copper Alloy CDA 10100 Profile / Section
  • Copper Profile Section CDA 10200
  • C10100/C10200 Copper Profile / Section
  • OFE C10100 Copper Profiles Sections
  • C11000 ETP Copper Profiles Sections
  • ASTM B133 ETP Copper Profiles